Search found 3233 matches

by Deep Thought
Sat Feb 24, 2018 4:51 pm
Forum: FCC Discussion
Topic: Management ignored me when I suggested LPFM....
Replies: 7
Views: 56

Re: Management ignored me when I suggested LPFM....

a streaming web presence with a phone app would be a much better solution. This. Legal Part 15 operation on the FM band will get you about a 200 foot radius and that is if you can find a clear frequency. *All* of the transmitters on eBay and Amazon except for the CCrane units are illegal to operate...
by Deep Thought
Sat Feb 24, 2018 12:18 pm
Forum: FCC Discussion
Topic: Management ignored me when I suggested LPFM....
Replies: 7
Views: 56

Re: Management ignored me when I suggested LPFM....

You can't. The limit is 100 milliwatts DC input power to the transmitter on AM and 250 uV/m at three meters field intensity on FM. That MS-15 will radiate more than that from the cabinet.
by Deep Thought
Fri Feb 23, 2018 9:23 am
Forum: FM Radio
Topic: Nautel V15 GE power supply failure
Replies: 2
Views: 111

Re: Nautel V15 GE power supply failure

They had a very high failure rate and were replacing them under warranty. Have you called?
by Deep Thought
Mon Feb 19, 2018 6:13 pm
Forum: Ask the Engineers
Topic: Band stop-Notch Filter suggestions
Replies: 9
Views: 193

Re: Band stop-Notch Filter suggestions

Just to clarify...it's not a shorting stub. Leave the end open, since what you want is a 1/4 wave at the reject frequency and that'll reflect j0 at the tee.
by Deep Thought
Mon Feb 19, 2018 10:09 am
Forum: Ask the Engineers
Topic: Band stop-Notch Filter suggestions
Replies: 9
Views: 193

Re: Band stop-Notch Filter suggestions

How much rejection is "good enough"? I've had pretty decent luck getting strong FM signals out of EAS receiver antenna connections by using a simple quarter-wave open stub teed off the the coax near the receiver. If you use quality coax and an actual tee adapter (not a splitter) you should be able t...
by Deep Thought
Wed Feb 14, 2018 10:54 am
Forum: FM Radio
Topic: Singling out 2 stations on same frequency
Replies: 29
Views: 1332

Re: Singling out 2 stations on same frequency

I was wondering why predicted (50/50) interference contours do not correlate almost exactly with predicted signal strength predictions. For interference calculations, power seems to be more important than height. It seems to me that if the flux density for the 60 dB contour is the same with the FCC...
by Deep Thought
Tue Feb 13, 2018 10:31 am
Forum: FM Radio
Topic: Translator Question...
Replies: 11
Views: 316

Re: Translator Question...

oldradioguy wrote:
Tue Feb 13, 2018 9:03 am
which I'm sure pleased the other owner in town whose three stations never left the air.
I guess it pleased him enough to not file a complaint.
by Deep Thought
Tue Feb 13, 2018 10:30 am
Forum: FM Radio
Topic: Translator Question...
Replies: 11
Views: 316

Re: Translator Question...

I have at least one client with daytime 2 mV/m contours well past 25 miles, so unless the FX 60 dBu is outside the 25 mile circle then it is unlikely to run into problems if the AM has to run at reduced power *temporarily*. You'll start getting the regulatory side-eye once this goes on for a year wi...
by Deep Thought
Mon Feb 12, 2018 9:04 am
Forum: AM Radio
Topic: Audio Bandwidth of an AM Broadcast Station
Replies: 9
Views: 504

Re: Audio Bandwidth of an AM Broadcast Station

I remember back in the early 1990's when AMAX was around to address that. That was one component of the program, the others being the NRSC-2 occupied bandwidth mask and the change from 0.5:0.5 to 0.5:0.25/0.25:0.5 mV/m first-adjacent protection, and moving some of the most interference-causing stat...
by Deep Thought
Sun Feb 11, 2018 10:28 pm
Forum: FM Radio
Topic: Translator Question...
Replies: 11
Views: 316

Re: Translator Question...

The translator has to go off if the AM is off for more than a few days. However, there is already one operator trying to get an STA to cheat on this rule so we'll see what happens.

I suspect the answer will be 'no'.
by Deep Thought
Sat Feb 03, 2018 11:54 am
Forum: AM Radio
Topic: 317c1 parts
Replies: 11
Views: 563

Re: 317c1 parts

that should be a no brainer. Indeed. A client out west where the temp routinely exceeds 100°F removed one 30 year old monster 3 ton AC from the roof and replaced it with two 2 ton mini splits, and has them set 10 degrees apart. This is in a small building with two 5 KW solid state AMs, an SX5 and a...
by Deep Thought
Mon Jan 29, 2018 11:20 am
Forum: FM Radio
Topic: Harris/Gates support
Replies: 22
Views: 1214

Re: Harris/Gates support

Shane wrote:
Sun Jan 28, 2018 11:36 pm
How long ago was that, Jake? We had a similar problem with a 35 toward the end of ‘17, bought the power supply from them but it was considerably more than $1200, IIRC.
jakebechtold wrote:
Sun Jan 28, 2018 11:01 pm
About two months ago now we had an intermittent issue with an HT20 CD
by Deep Thought
Fri Jan 26, 2018 10:53 am
Forum: AM Radio
Topic: 317c1 parts
Replies: 11
Views: 563

Re: 317c1 parts

You'll also enjoy the 50% reduction in the power bill. :mrgreen:
by Deep Thought
Sun Jan 21, 2018 10:11 pm
Forum: TV Engineering
Topic: Can´t receive sat freq over 11500 V or H
Replies: 7
Views: 202

Re: Can´t receive sat freq over 11500 V or H

Back in the early days of satellite-delivered programming in the USA it was not unusual to have to enclose the dish in some sort of metal mesh to avoid terrestrial interference from things like AT&T microwave relay installations. Do you have enough room (and permission) to build a "mesh wall" (basic...
by Deep Thought
Wed Jan 17, 2018 9:40 pm
Forum: TV Engineering
Topic: Audio board EQ for newscasts
Replies: 7
Views: 227

Re: Audio board EQ for newscasts

Your audiophile viewers probably wouldn't know how to properly mic a live show if their oxygen-free brain had to.