Search found 482 matches

by Kelly
Wed Sep 20, 2017 9:29 am
Forum: FM Radio
Topic: Tower needed
Replies: 3
Views: 320

Re: Tower needed

It boils down to a tower designed for the weight and wind loading characteristics for the environment it will be located. For example; a tower located in the desert near sea level with light winds will require less structural elements than a tower atop a 4,000ft mountain top site with freezing fog o...
by Kelly
Thu Aug 31, 2017 10:10 am
Forum: FM Radio
Topic: Audemat FMB80 RDS and RCS..
Replies: 3
Views: 340

Re: Audemat FMB80 RDS and RCS..

It's been a while since setting one of these up, but generally you'll need a PC running some form of middle-ware application between what your automation spits out, and your RDS encoder. Allen Hartle at Jump2Go is the guru on making really good interfaces for RDS. I've always used his applications f...
by Kelly
Thu Aug 10, 2017 6:27 pm
Forum: FM Radio
Topic: Harris HT30 issue
Replies: 10
Views: 647

Re: Harris HT30 issue

So this HT30 is randomly shutting down. Sometimes with no faults, other times with other random faults. No two times are a like (not the same fault indicator twice). After it shuts down, it attempts to restart a couple of times, then it will reset, and flame up like normal. You can apply the Plate ...
by Kelly
Tue Aug 08, 2017 12:01 pm
Forum: AM Radio
Topic: Bad hum
Replies: 6
Views: 628

Re: Bad hum

As low-tech as it sounds, the tried and true troubleshooting always pays. I would: Start at the transmitter site. Disconnect the audio input from the STL to the transmitter and look for the noise to go away. Goes away? Then go to the studio and disconnect the audio from the transmitter STL input. No...
by Kelly
Thu Aug 03, 2017 9:40 am
Forum: STL Engineering
Topic: Backup STL link
Replies: 8
Views: 721

Re: Backup STL link

If you're just looking for a backup positive way to shut off the transmitter, why not use the squelch contacts on the STL receiver and connect it to one of the transmitter external interlock connections? Shut down the STL transmitter and off goes your broadcast transmitter.
by Kelly
Tue Jul 04, 2017 5:04 pm
Forum: FM Radio
Topic: Static Dissipators?
Replies: 13
Views: 910

Re: Static Dissipators?

Agree with Mark, there may be something to Static Cats or other spine-ball devices, but it's hard to document. Most of these devices are installed on top of the tower, but that doesn't stop other parts of the tower from being struck. That said, I can't think of a tower which uses some of these devic...
by Kelly
Wed May 24, 2017 11:15 am
Forum: Radio Studio Engineering
Topic: Wheatnet vs AXIA
Replies: 8
Views: 810

Re: Wheatnet vs AXIA

We're using Axia and Pathfinder to great success with our six radio studios. We steered away from Wheatstone, mainly because we experienced a poor customer support with one of our big TV consoles. My impression: Wheatstone has a lot of blinking lights and graphics, but the overall construction seems...
by Kelly
Wed May 24, 2017 11:11 am
Forum: Broadcast Engineering News
Topic: FCC fines two operators run a LPTV 18 years after expiration
Replies: 1
Views: 443

Re: FCC fines two operators run a LPTV 18 years after expiration

Just the simple fact that it took the Commission 18 years to notice and act? Speaks volumes.
by Kelly
Wed Apr 26, 2017 2:06 pm
Forum: FM Radio
Topic: New Sound Board
Replies: 8
Views: 530

Re: New Sound Board

Why not just fix the headphone amp? I'm sure there is someone around with basic electronic troubleshooting skills and a good soldering iron that can repair it. $100 vs. even $1,000? Seems like a no-brainer to me.

What is the make and model of the console?
by Kelly
Wed Apr 12, 2017 9:09 am
Forum: Ham Radio
Topic: Emergency communication
Replies: 8
Views: 1108

Re: Emergency communication

Thinking from the emergency communication aspect a ham license is almost a must if you maintain sites that have to work in all situations and you need to communicate with other engineers. Provided you didn't communicate via amateur radio with other Engineers about business-related issues. For examp...
by Kelly
Wed Apr 12, 2017 8:59 am
Forum: Radio Studio Engineering
Topic: NexGen for home use
Replies: 2
Views: 415

Re: NexGen for home use

I believe you have to move up to RCS Zetta, for their remote voice tracking option.
by Kelly
Wed Apr 12, 2017 8:58 am
Forum: Internet Streaming
Topic: IP streaming of multiple satellite tv channels
Replies: 1
Views: 354

Re: IP streaming of multiple satellite tv channels

What is your resolution/quality expectation? Not inexpensive my any measure, but there are several brands of IP video/audio encoders that will give you the ability to IP stream over the public Internet. The good ones will cost you $60,000 USD per channel, per stream, but they're professional grade, ...
by Kelly
Wed Apr 12, 2017 8:53 am
Forum: Digital Television
Topic: smpte 2022 vidéo over IP network
Replies: 1
Views: 291

Re: smpte 2022 vidéo over IP network

Just curious why you're hung up on SMPTE 2022 as a requirement? We use off the shelf IP encoders from Fujitsu and Harmonic from several of our overseas bureaus using VPN tunnels over the public Internet with great success. Much less expensive, higher quality, and lower cost than satellite by any mea...
by Kelly
Wed Apr 12, 2017 8:42 am
Forum: FM Radio
Topic: RBDS Phase
Replies: 7
Views: 621

Re: RBDS Phase

Yeah I've never heard about dealing with phasing of RDS. As everyone else mentioned, it's pretty much: Mount device, plug in power, connect to exciter, audio processor, or loop through composite audio. Insert external data as available, set injection level, done! Next, go have lunch at your favorite...
by Kelly
Thu Mar 23, 2017 7:51 am
Forum: FM Radio
Topic: High Pitched Tone in FM Audio?
Replies: 23
Views: 1623

Re: High Pitched Tone in FM Audio?

Now that you've got the exciter issues in hand, you may want to check for AM noise next. If you don't have one available already, see if you can get your hands on a newer Belar or decent modulation monitor that measures AM noise. That transmitter-exciter combination all tuned up, should see AM noise...