Ham Engineers, sign in please!

Ham it up!
Post Reply
User avatar
BroadcastDoc
Site Admin
Posts: 2729
Joined: Tue Nov 13, 2007 3:34 pm
Location: Milwaukee, WI
Contact:

Ham Engineers, sign in please!

Post by BroadcastDoc » Wed Nov 14, 2007 10:08 pm

Hello from W9JOL!
Christopher "Doc" Tarr CSRE, DRB, AMD, CBNE
Help support the Virtual Engineer, use our 1&1 Affiliate link if you need good, cheap hosting.
Virtual Engineer. The Broadcast Engineering discussion forum

User avatar
K9EZ
Site Admin
Posts: 2986
Joined: Wed Nov 14, 2007 3:16 pm
Location: Raleigh, NC
Contact:

Re: Ham Engineers, sign in please!

Post by K9EZ » Thu Nov 15, 2007 7:30 am

BroadcastDoc wrote:Hello from W9JOL!
Hello from... well.. K9EZ of course

VXO
Posts: 45
Joined: Thu Nov 15, 2007 2:18 pm
Location: Miami, FL
Contact:

Post by VXO » Thu Nov 15, 2007 2:21 pm

Hi, from KG4CYX.

Whee.
A K T I V - S C H A U M

User avatar
rockmanac
Moderator
Posts: 1201
Joined: Wed Nov 14, 2007 9:18 am
Location: St. Paul, MN
Contact:

Post by rockmanac » Sun Nov 18, 2007 1:43 am

KC9JHY here!

-A

User avatar
billcroghan
Posts: 89
Joined: Mon Dec 03, 2007 1:07 pm
Location: Las Vegas, NV
Contact:

Post by billcroghan » Mon Dec 03, 2007 1:32 pm

Hi from WB0KSW
Bill Croghan CPBE WB?KSW
Chief Engineer,
KOMP/KXPT/KENO/KBAD/KWWN
Lotus Broadcasting, Las Vegas, NV

User avatar
BroadcastDoc
Site Admin
Posts: 2729
Joined: Tue Nov 13, 2007 3:34 pm
Location: Milwaukee, WI
Contact:

Post by BroadcastDoc » Mon Dec 03, 2007 1:34 pm

Welcome, Bill!

Glad you joined us!
Christopher "Doc" Tarr CSRE, DRB, AMD, CBNE
Help support the Virtual Engineer, use our 1&1 Affiliate link if you need good, cheap hosting.
Virtual Engineer. The Broadcast Engineering discussion forum

User avatar
K9EZ
Site Admin
Posts: 2986
Joined: Wed Nov 14, 2007 3:16 pm
Location: Raleigh, NC
Contact:

Post by K9EZ » Mon Dec 03, 2007 2:39 pm

billcroghan wrote:Hi from WB0KSW
Bill Croghan CPBE WB?KSW
Chief Engineer,
KOMP/KXPT/KENO/KBAD/KWWN
Lotus Broadcasting, Las Vegas, NV
hey Bill, how are those CPs coming along?
Kent Winrich
Owner, Consultant, Floor Sweeper and Official Thread Hijacker
Broadcast and Technology Blog http://sceotech.com/blog/
Raleigh, NC

User avatar
billcroghan
Posts: 89
Joined: Mon Dec 03, 2007 1:07 pm
Location: Las Vegas, NV
Contact:

cp's

Post by billcroghan » Tue Dec 04, 2007 10:14 am

The CP for the new 1100 20KW/2 KW is awaiting the PTA and anxious to get moving.
BIll

Marathon Don
Posts: 8
Joined: Fri Nov 16, 2007 11:00 am
Location: Lucama, NC USA
Contact:

Post by Marathon Don » Thu Dec 13, 2007 7:57 am

Well, I'm only an engineer in spirit of Walter Mitty, but here is NC4DF.

Don

User avatar
Sam Buca
Moderator
Posts: 1329
Joined: Tue Dec 04, 2007 10:36 am
Location: Dallas, TX

Post by Sam Buca » Thu Dec 13, 2007 10:41 am

KB3OOJ. A no-code general who can do code :D

User avatar
RGORJANCE
Posts: 1387
Joined: Mon Dec 31, 2007 7:48 am
Location: RACINE, WI

Re: Ham Engineers, sign in please!

Post by RGORJANCE » Wed Jan 02, 2008 11:48 am

Hi ya'll!

W5CFB
Bob Gorjance
Contract Engineer-Wind Point Communications-Clients are anyone who can pay my vastly inflated rates.
Fire bottles rule!

User avatar
antennaclimber
Posts: 96
Joined: Sun Dec 02, 2007 5:59 pm
Location: Central PA

Re: Ham Engineers, sign in please!

Post by antennaclimber » Wed Jan 02, 2008 4:55 pm

I'll sign in too. Not an Engineer as such, but still do lots of work in the broadcast industry.
K3ARL

User avatar
OnAir
Posts: 1
Joined: Wed Feb 06, 2008 1:27 pm
Location: Vancouver, BC

Re: Ham Engineers, sign in please!

Post by OnAir » Wed Feb 06, 2008 1:38 pm

Thought I'd say hello to everyone as well.

ve6zap
Mike Nerenberg
Transmission & Distribution
CBC / Radio Canada
Vancouver, BC

User avatar
BroadcastDoc
Site Admin
Posts: 2729
Joined: Tue Nov 13, 2007 3:34 pm
Location: Milwaukee, WI
Contact:

Re: Ham Engineers, sign in please!

Post by BroadcastDoc » Wed Feb 06, 2008 3:34 pm

Welcome, Mike!
Christopher "Doc" Tarr CSRE, DRB, AMD, CBNE
Help support the Virtual Engineer, use our 1&1 Affiliate link if you need good, cheap hosting.
Virtual Engineer. The Broadcast Engineering discussion forum

w9wi
Posts: 843
Joined: Tue Feb 05, 2008 11:40 am
Location: Pleasant View, Tennessee
Contact:

Re: Ham Engineers, sign in please!

Post by w9wi » Thu Feb 07, 2008 8:48 am

BroadcastDoc wrote:Welcome, Mike!
--
Doug Smith W9WI
Pleasant View, TN EM66

Post Reply