Hard to set priorities sometimes

Have a site with some cool media? Post the links here
Post Reply
User avatar
PID_Stop
Posts: 474
Joined: Thu Apr 01, 2010 11:58 am
Location: Syracuse, New York
Contact:

Hard to set priorities sometimes

Post by PID_Stop » Tue Aug 28, 2012 7:44 am

Opened a shipment from Utah Scientific yesterday...

Image

Good thing these were the five output boards, not the nine input cards: rounding up another four people to open them all simultaneously would have been difficult.

-- Jeff

User avatar
Shane
Posts: 705
Joined: Fri Feb 01, 2008 12:08 am
Location: Omaha
Contact:

Re: Hard to set priorities sometimes

Post by Shane » Tue Aug 28, 2012 10:54 am

Merry Christmas!
Mike Shane, CBRE
---Omaha---

User avatar
NECRAT
Site Admin
Posts: 2900
Joined: Sat Nov 17, 2007 9:13 pm
Location: Taunton, MA
Contact:

Re: Hard to set priorities sometimes

Post by NECRAT » Tue Aug 28, 2012 12:24 pm

PID_Stop wrote:Opened a shipment from Utah Scientific yesterday...

Good thing these were the five output boards, not the nine input cards: rounding up another four people to open them all simultaneously would have been difficult.

-- Jeff
Do you have a good contact at US? I.e. someone who actually returns a phone call?

The three calls I've made there have still gone unanswered.
http://www.necrat.us

"Arguing with an engineer is like mud wrestling with a pig. After a couple of hours, you realize the pig likes it"

User avatar
Dale H. Cook
Posts: 713
Joined: Thu Dec 20, 2007 9:08 am
Location: Roanoke/Lynchburg, VA
Contact:

Re: Hard to set priorities sometimes

Post by Dale H. Cook » Tue Aug 28, 2012 2:06 pm

PID_Stop wrote:rounding up another four people to open them all simultaneously would have been difficult.
LOL! It would have been nearly impossible here - there are seldom as many as nine people in the facility at one time. "-)
Dale H. Cook, Contract Engineer, Roanoke/Lynchburg, VA
http://plymouthcolony.net/starcityeng/index.html

User avatar
PID_Stop
Posts: 474
Joined: Thu Apr 01, 2010 11:58 am
Location: Syracuse, New York
Contact:

Re: Hard to set priorities sometimes

Post by PID_Stop » Wed Aug 29, 2012 7:05 am

NECRAT wrote:Do you have a good contact at US? I.e. someone who actually returns a phone call?

The three calls I've made there have still gone unanswered.
I just sent you a PM with the contact for our area's field engineer.

-- Jeff

ChuckG
Posts: 874
Joined: Tue Mar 11, 2008 11:12 pm
Location: Moo
Contact:

Re: Hard to set priorities sometimes

Post by ChuckG » Wed Aug 29, 2012 11:56 pm

If you opened the box first you already screwed up. :lol:
<><><><><><><><><>
Chuck Gennaro
Central Wisconsin

User avatar
PID_Stop
Posts: 474
Joined: Thu Apr 01, 2010 11:58 am
Location: Syracuse, New York
Contact:

Re: Hard to set priorities sometimes

Post by PID_Stop » Thu Aug 30, 2012 11:34 am

ChuckG wrote:If you opened the box first you already screwed up. :lol:
Now you tell me! :lol:

User avatar
NECRAT
Site Admin
Posts: 2900
Joined: Sat Nov 17, 2007 9:13 pm
Location: Taunton, MA
Contact:

Re: Hard to set priorities sometimes

Post by NECRAT » Thu Aug 30, 2012 2:15 pm

You need to open the one on the right hand side. See it's a trick. All the horizontal open firsts are fake, the one lone vertical one is the real one.
http://www.necrat.us

"Arguing with an engineer is like mud wrestling with a pig. After a couple of hours, you realize the pig likes it"

User avatar
K9EZ
Site Admin
Posts: 2986
Joined: Wed Nov 14, 2007 3:16 pm
Location: Raleigh, NC
Contact:

Re: Hard to set priorities sometimes

Post by K9EZ » Fri Aug 31, 2012 3:59 pm

Is this like an "Order of Operations" test?
Kent Winrich
Owner, Consultant, Floor Sweeper and Official Thread Hijacker
Broadcast and Technology Blog http://sceotech.com/blog/
Raleigh, NC

miklk1973
Posts: 14
Joined: Sun Sep 12, 2010 6:46 am

Re: Hard to set priorities sometimes

Post by miklk1973 » Wed Sep 12, 2012 12:09 pm

When you get to the last one there is a note inside that says not to open any of them first.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest