Z 10 rigs

FM does it with frequency!
Post Reply
rich wood
Posts: 87
Joined: Mon Jan 24, 2011 10:56 am
Location: Madison, WI
Contact:

Z 10 rigs

Post by rich wood » Tue Feb 21, 2017 8:11 am

Howdy,
I had heard that the power amps for the Z 10 Harris rig are getting not so available these days. Is that true?
Thanks

PA_TUNE
Posts: 46
Joined: Thu Feb 04, 2010 6:58 pm

Re: Z 10 rigs

Post by PA_TUNE » Tue Feb 21, 2017 9:12 am

GatesAir has them on exchange, though roughly $800 per.

Kelly
Posts: 474
Joined: Thu Aug 21, 2008 5:32 pm
Location: Washington D.C. Area

Re: Z 10 rigs

Post by Kelly » Tue Feb 21, 2017 1:11 pm

I've been pretty successful repairing them on my kitchen table. The output transistors are available from the Philippines for about $30 each from Alibaba.com. A large soldering pencil and some solder wick and the blown transistors are easily removed. In spite of just one transistor being blown, I have always replaced them all. No special jigs or factory required. The ones I've repaired have been in service for over ten years now.
Skype:kellyalford Twitter: @KellyAlford

Steve Brown
Posts: 1
Joined: Tue Feb 21, 2017 4:23 pm

Re: Z 10 rigs

Post by Steve Brown » Tue Feb 21, 2017 4:29 pm

Rich, you might want to contact engineering at Minnesota Public Radio. When we converted some of their Z transmitters to HD radio the old analog modules got pulled and the new linearized modules were installed, and I think they hung onto the analog modules--they should have a bunch of them.

The Other Steve Brown (Minnesota)

User avatar
davek
Posts: 145
Joined: Sun Aug 02, 2009 7:28 pm
Location: Sydney, Australia

Re: Z 10 rigs

Post by davek » Wed Feb 22, 2017 3:45 am

I have also successfully repaired Z PA modules .. transistors were purchased from DigiKey.

Also, having since totally re-built the rectifier modules using different fuses, I have not had a single PSU TAP fault in the 18 months since installing them. :D

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest