It's just radio with pictures!
3 posts • Page 1 of 1
Vistalink devices just use SNMP messaging. Each device can send alerts to the monitoring system when they're on the same WAN or virtual network. It's been a while since I've set up a Vistalink system, but it is more than checking a box. You need to assign unique IP addresses of all the devices reporting to the monitoring system. Vistalink should then identify all the devices it can see. If it sees all the devices, then you'll need to set up the address list and what the alert rules. It takes a while to set up a monitoring system. Is this a new system to you, or an existing one that was never set up?
Skype:kellyalford Twitter: @KellyAlford