How do I add a limiter on Mic #1 on the BMX-II? (How do I tap into the Mic Pre Amp before it hits the board?)
Thank you all.
CMc
Add limiter on Mic #1 on BMX-II Console
- Bill DeFelice
- Posts: 235
- Joined: Wed May 18, 2011 6:29 pm
- Location: Fairfield County, CT
- Contact:
Re: Add limiter on Mic #1 on BMX-II Console
Before I replaced the BMX with another console I just put an attenuator in front and fed the mic processor into that channel. I probably could have bypassed the preamp stage with without the manual handy I took the lazy way out. You could just build up an attenuator or use a Shure A15LA XLR line to mic adapter if you don't want to roll your own.
Webmaster
History of Westport Connecticut Radio
The WMMM Tribute Site
CampusBroadcaster.net
Legal, low power, license-free broadcasting for educational institutions
History of Westport Connecticut Radio
The WMMM Tribute Site
CampusBroadcaster.net
Legal, low power, license-free broadcasting for educational institutions
-
- Posts: 2
- Joined: Sat Jun 07, 2014 8:14 pm
Re: Add limiter on Mic #1 on BMX-II Console
Bill,
Thanks for the reply, Shure A15LA is spoken here.
CMc
Thanks for the reply, Shure A15LA is spoken here.
CMc