Harris CD Link

Gotta watch those Fresnel zones!
Post Reply
wiztstar
Posts: 2
Joined: Tue Mar 10, 2020 12:10 pm
Contact:

Harris CD Link

Post by wiztstar »

I have a Harris CD Link TX that shows all OK in Standby mode, but the VSWR reads 99.99%. Is it work saving?
Kelly
Posts: 551
Joined: Thu Aug 21, 2008 5:32 pm
Location: Washington D.C. Area

Re: Harris CD Link

Post by Kelly »

Have you connected it to a known good 50 ohm load? High VSWR is an unusual internal thing to go wrong.
Skype:kellyalford Twitter: @KellyAlford
Nathaniel Steele
Posts: 163
Joined: Mon Mar 06, 2017 4:02 pm
Location: Tennessee

Re: Harris CD Link

Post by Nathaniel Steele »

Not on a CDLINK, but I have seen the Center Connector come undone internally on the N or BNC Connectors, so could be worth popping the top and having a look.
wiztstar
Posts: 2
Joined: Tue Mar 10, 2020 12:10 pm
Contact:

Re: Harris CD Link

Post by wiztstar »

Thanks for the response. That error is showing even with the RF off. I think these units are toast.
Post Reply