Page 1 of 1

SS32 EOM with Overlap... possible?

Posted: Tue Oct 16, 2012 7:03 pm
by userjf
In SS32, if I set the EOM to 5 seconds, then I WANT the next song to begin playing during the last 5 seconds of the current song.

However, instead, it is cutting the last 5 seconds of the song off, and then beginning the next song.

Is there a setting anywhere to make it overlap the next song during that last 5 seconds instead of just cutting the first one off?

Thanks.

Re: SS32 EOM with Overlap... possible?

Posted: Wed Oct 17, 2012 1:57 am
by ChuckG
Are you using multiple switcher channels for the audio card outputs? You'll get this if the switcher is set to switch hard instead of allowing channel overlap.

Re: SS32 EOM with Overlap... possible?

Posted: Wed Oct 17, 2012 2:57 pm
by KPJL FM
ChuckG wrote:Are you using multiple switcher channels for the audio card outputs? You'll get this if the switcher is set to switch hard instead of allowing channel overlap.
If you have the need for a switcher (I/O or recording input switching), then you need the BT SS style switcher, and check the DIP switch inside for proper setting to allow overlap.

If you don't need the switcher, set the SS32 to play out the first device.

If you have the SS32 controlling a console On/Off switches remotely, Overlap should be normal. SS32 will set the fader off at EOF, not EOM.

Done this toooo many times.