TFT EAS 999 and 940A manual
TFT EAS 999 and 940A manual
Anyone have a manual for an EAS 999 and 940A? I think the 940A is squared away, so I'm more interested in the 999. Need to know the dipswitch/jumper and terminal block info. Right now it seems it requires +5Vdc on pin 1 to be connected to pin 6 to activate the insert, which sucks. I'm looking to see if I can change a setting to pull it to ground instead.
- BroadcastDoc
- Site Admin
- Posts: 2733
- Joined: Tue Nov 13, 2007 3:34 pm
- Location: Milwaukee, WI
- Contact:
Re: TFT EAS 999 and 940A manual
Check your email shortly...
Christopher "Doc" Tarr CSRE, DRB, AMD, CBNE
Help support the Virtual Engineer, use our 1&1 Affiliate link if you need good, cheap hosting.
Virtual Engineer. The Broadcast Engineering discussion forum
Help support the Virtual Engineer, use our 1&1 Affiliate link if you need good, cheap hosting.
Virtual Engineer. The Broadcast Engineering discussion forum
Re: TFT EAS 999 and 940A manual
Thanks.
I had to use a 2N3906 to switch it on/off. And the heat shrink tubing seems to be all gone so it looks ugly as hell.
I had to use a 2N3906 to switch it on/off. And the heat shrink tubing seems to be all gone so it looks ugly as hell.
- Chris from Milwaukee
- Posts: 628
- Joined: Fri Nov 16, 2007 12:40 pm
- Location: Milwaukee, WI
Re: TFT EAS 999 and 940A manual
Remember, Sam, that pretty is optional, functionality is not.Sam Buca wrote: And the heat shrink tubing seems to be all gone so it looks ugly as hell.
Chris from Milwaukee
Feeding Broadcast Engineers Worldwide
(And transmitter salesmen too!)
Feeding Broadcast Engineers Worldwide
(And transmitter salesmen too!)
Re: TFT EAS 999 and 940A manual
Help. I just found an old used 940A, and need help getting the connects right.BroadcastDoc wrote:Check your email shortly...
I would love to get the manual also (if you still have it.)
thanks
roger
- BroadcastDoc
- Site Admin
- Posts: 2733
- Joined: Tue Nov 13, 2007 3:34 pm
- Location: Milwaukee, WI
- Contact:
Re: TFT EAS 999 and 940A manual
Unfortunately all I have is the 999 manual.
Christopher "Doc" Tarr CSRE, DRB, AMD, CBNE
Help support the Virtual Engineer, use our 1&1 Affiliate link if you need good, cheap hosting.
Virtual Engineer. The Broadcast Engineering discussion forum
Help support the Virtual Engineer, use our 1&1 Affiliate link if you need good, cheap hosting.
Virtual Engineer. The Broadcast Engineering discussion forum
Re: TFT EAS 999 and 940A manual
Hello, I'm Looking for a TFT 940A Manual.