SONY D2 VTR DVR-10 error "SY-PANEL communication stop"

Want to know how something works? Harness the power of the Brainiacs!
Post Reply
digicube
Posts: 2
Joined: Sat May 23, 2020 4:40 pm

SONY D2 VTR DVR-10 error "SY-PANEL communication stop"

Post by digicube »

Error message
"(8) INITIAL keep off all the controls "
"SY-PANEL communication stop"

I've replaced the NVRAM with a new old stock one but still no fix. I tested the internal battery of the old RAM and it tested fine, so it's not the NVRAM.
NECRAT
Site Admin
Posts: 3220
Joined: Sat Nov 17, 2007 9:13 pm
Location: Taunton, MA
Contact:

Re: SONY D2 VTR DVR-10 error "SY-PANEL communication stop"

Post by NECRAT »

You have a stuck button? Or the ground to the button panel has gone bad?
Mike Fitzpatrick
Broadcast Engineer/Tower Photographer
Boston area.
https://www.necrat.us, https://www.scan-ne.net/

"If you don’t think you’re good, nobody else will" - Tom Laun (RIP)."
Post Reply