ECO-4 plate current meter

FM does it with frequency!
Post Reply
Joe Friday
Posts: 94
Joined: Tue Dec 16, 2014 3:47 am

ECO-4 plate current meter

Post by Joe Friday »

Greetings. I look after several Bernie Boxes, and I have a ECO-4 with an intermittent plate current meter. The transmitter and manual are at a site that has access issues, and was hoping someone might know of an aftermarket source, or at least be able to give me some specs. Does anyone know if the meter uses an internal shunt (I am assuming it does)?

Thanks!

Kevin

level42
Posts: 33
Joined: Sat Mar 01, 2008 12:18 pm

Re: ECO-4 plate current meter

Post by level42 »

If you want to download the manual, join our Energy-Onix support group on Fbook! https://www.facebook.com/groups/1037366859617513/

If you're not an Fbooker, email me at reelaudio at gmail dot com and I'll email you the manual.

BTW...I have bought aftermarket meters for the Eco boxes, but I'll have to do some digging to find the manufacturer/part number.

Joe Friday
Posts: 94
Joined: Tue Dec 16, 2014 3:47 am

Re: ECO-4 plate current meter

Post by Joe Friday »

Thanks for the tip on the FB group. Just downloaded the manual, and requested to join. If you run across the meter info, please let me know.

Thanks again!

Kevin

level42
Posts: 33
Joined: Sat Mar 01, 2008 12:18 pm

Re: ECO-4 plate current meter

Post by level42 »

I just updated the Fbook group with the meter info, but I'll post it here also.

Energy-Onix Eco front panel meter info:
Meters were made by Summit Co. LTD. US distributor is: http://www.brighton-electronics.com/ana ... meters.htm
Multimeter: S3PLUADO 0-100uA DC
Plate Current: S3PLUADO-EN 0-100uA DC
Plate Voltage: S3PLMADAVVDZZ-EN 0-1mA DC
Power: S3PLVVDD-EN 0-5v DC

Post Reply