Ennergey-Onix Former Engineer

FM does it with frequency!
Post Reply
cyleland
Posts: 8
Joined: Sat Jan 17, 2015 1:08 pm

Ennergey-Onix Former Engineer

Post by cyleland » Wed Jan 31, 2018 5:37 pm

Hi all
I recall seeing on here a few months ago a post from a person who had worked for Bernie at Energy-Onix and offered support for reasonable $$
If you know of or are that person, please post a way to contact or contact me below
I have an ECO10 FM with IPA drive problems

Thanks!
Cy
westnman@yahoo.com

User avatar
NECRAT
Site Admin
Posts: 3030
Joined: Sat Nov 17, 2007 9:13 pm
Location: Taunton, MA
Contact:

Re: Ennergey-Onix Former Engineer

Post by NECRAT » Wed Jan 31, 2018 6:53 pm

You could also post the issue here, in case the EO engineer can't help you, someone else on here possibly could. We got a lot of smart folks here with a ton of experience.
http://www.necrat.us

"Arguing with an engineer is like mud wrestling with a pig. After a couple of hours, you realize the pig likes it"

TvRadioGuy
Posts: 26
Joined: Mon Sep 12, 2016 10:40 am

Re: Ennergey-Onix Former Engineer

Post by TvRadioGuy » Mon Aug 13, 2018 8:48 pm

If you have an IPA problem you may have your IPA sent to Michael Patton & Associates in Baton Rouge, LA. They repair and Calibrate your IPA.
You may have one of your Pallet Amps that is Burnt and only making half the power and Your IPA is only working on one Pallet. Not sure if your ECO 10 has 2 or one power Supplies for the IPA you may have those check too.

Good Luck

Post Reply