Page 1 of 1

Ennergey-Onix Former Engineer

Posted: Wed Jan 31, 2018 5:37 pm
by cyleland
Hi all
I recall seeing on here a few months ago a post from a person who had worked for Bernie at Energy-Onix and offered support for reasonable $$
If you know of or are that person, please post a way to contact or contact me below
I have an ECO10 FM with IPA drive problems

Thanks!
Cy
westnman@yahoo.com

Re: Ennergey-Onix Former Engineer

Posted: Wed Jan 31, 2018 6:53 pm
by NECRAT
You could also post the issue here, in case the EO engineer can't help you, someone else on here possibly could. We got a lot of smart folks here with a ton of experience.

Re: Ennergey-Onix Former Engineer

Posted: Mon Aug 13, 2018 8:48 pm
by TvRadioGuy
If you have an IPA problem you may have your IPA sent to Michael Patton & Associates in Baton Rouge, LA. They repair and Calibrate your IPA.
You may have one of your Pallet Amps that is Burnt and only making half the power and Your IPA is only working on one Pallet. Not sure if your ECO 10 has 2 or one power Supplies for the IPA you may have those check too.

Good Luck

Re: Ennergey-Onix Former Engineer

Posted: Tue Aug 14, 2018 8:22 am
by NECRAT
TvRadioGuy wrote:
Mon Aug 13, 2018 8:48 pm
If you have an IPA problem you may have your IPA sent to Michael Patton & Associates in Baton Rouge, LA. They repair and Calibrate your IPA.
You may have one of your Pallet Amps that is Burnt and only making half the power and Your IPA is only working on one Pallet. Not sure if your ECO 10 has 2 or one power Supplies for the IPA you may have those check too.

Good Luck
Unfortunately, the OP hasn't been on since he posted this. So he may not see this.

Re: Ennergey-Onix Former Engineer

Posted: Tue Aug 14, 2018 9:56 am
by level42
We have an Energy-Onix support group here: https://www.facebook.com/groups/1037366859617513/