LPB S-12 hacked wiring

Post Reply
Posts: 90
Joined: Wed Jul 21, 2010 1:19 pm
Location: Binghamton, NY

LPB S-12 hacked wiring

Post by BingNYEng » Wed Jul 22, 2015 1:02 pm

I'm "restoring" an LPB S-12 console that was pulled from service around 2002. Along the way, the wiring to the monitor volume control wiring was hacked up. I'm not having any luck finding any wiring diagrams or schematics online. Does anyone have one of these with original wiring? I'm just looking to see a picture of what wires went where. There is a cable numbered "28" with a red, black, and shield hanging in air. The other end terminates on the main board near the monitor amplifier cards. There is also a twisted pair of red/black coming from the adjacent "Phones" selector that is just hanging in space as well. The monitor pot is in place, but doesn't have any wires soldered to the 6 terminals anymore, so I'm just trying to figure out what went where and if anything else was completely removed.

User avatar
Bill DeFelice
Posts: 234
Joined: Wed May 18, 2011 6:29 pm
Location: Fairfield County, CT

Re: LPB S-12 hacked wiring

Post by Bill DeFelice » Wed Jul 22, 2015 1:32 pm

It's not a gerat scan but I have the riser diagram for the S-20 which is also part of the Signature II series if you think that will help you. Let me know.
History of Westport Connecticut Radio
The WMMM Tribute Site

Legal, low power, license-free broadcasting for educational institutions

Post Reply